inVue AK4400 Скачать руководство пользователя страница 2

ORANGE 

= 1 hour or less 

of activation time remaining 
(return to Key Authorization 
Station soon)

Remove key. Key is now activated for 
12 hours of use.

 Note: 

An unlimited 

number of keys can be authorized by 
a single Key Authorization Station.

If key was checked out at beginning 
of shift, check back in at end of shift 
to de-authorize. 

Return key to charger at the end of 
each shift. 

For use with Key Authorization 
Station, once purple LED is no longer 
flashing, press “OUT” button. 

Note:

 

If key makes a double “buzz,” then 
a programming error has occurred. 
Remove key and try again.

8

9

© 2016 InVue Security Products Inc. All rights reserved.

InVue is a registered trademark of InVue Security Products.

SD0328 Rev1 05/12/16

www.invue.com  

NA / LATAM

 // 704.752.6513 • 888.55.INVUE

EMEA

 // +31.23.8900150

APAC

 // +852.3127.6811

7b

“BEEP”

Blue LED will 

confirm valid 

activation

Press 

button to 

check out

Refer to installation of 

InVue Access Manager for 

programming instructions

Press button 

to check in

BATTERY INDICATOR LIGHTS

(When key is

 out

 of KAS)

ACTIVATION LIGHTS

(When key is

 out

 of KAS & button is pressed)

POWER LIGHTS

(When key is

 out

 of KAS & button is pressed)

BLUE

 = Activated and 

can provide power

RED 

= Not activated or 

battery too low for wire-
less devices. Check other 
LED’s for activation time 
or battery charge level.

Flashing PURPLE

 = 

Unlocked cabinet 
reminder or error “buzz”

GREEN

 = More than 1 

hour of activation time 
remaining (continue use)

RED

 = Deactivated

(return to Key 
Authorization Station 
immediately)

If LED is 

GREEN

 when 

button is pressed, the 
battery is good (continue 
use).

If LED is 

flashing 

ORANGE

, the battery 

is low (return to Key 
Authorization Station soon).

If LED is 

RED

 when button 

is pressed, the battery is 
too low for use (return to 
Key Authorization Station 
immediately).

For use with Key Authorization 
Station, confirm green light is on 
and constant. If green light is not 
on, confirm power is getting to Key 
Authorization Station. Once key has 
been fully charged, place key on Key 
Authorization Station. LED will flash 
purple momentarily.

7a

Green LED

Flashes purple 

when key is 

first inserted

Отзывы: