Goodrive800 Pro Series Inverter Unit Hardware Manual
Mechanical installation
202202 (V1.0)
18
Figure 3-2 Transportation means
3.3.3
Unpacking
The unit is delivered in the wooden box padded with EPE.
To remove the packing, do as follows:
Step 1
Place the well-packed unit in an empty and flat place.
Step 2
Use tools such as a pry bar or large one-piece screwdriver to remove the wooden box cover and the
steel tongue nails of the surrounding boards.
Step 3
Remove the surrounding boards and EPE filling materials from the wooden box.
Step 4
Cut off the plastic windings.
Step 5
Take out of the unit.
Step 6
Ensure that the unit is intact without any damage.
Dispose of or recycle packaging in accordance with local regulations.
Figure 3-3 Unpacking
3.3.4
Lifting
Attach the required lifting ring to the locations shown in the figure, use the sling to slowly lift the unit end,
move the unit until it is completely lifted, place it vertically in the empty and flat place, and then unfold the
Sideboard 1
Sideboard 2
Pallet
Cover
Inverter unit
EPE
