Goodrive350-19 series VFD for crane
Function parameter list
-366-
Function
code
Name
Description
Default
Modify
setting range: 0
of drum winding)
setting range: 100.0
–2000.0mm
(Max. drum diameter in upward limit, including
cable thickness)
P19.15
setting range: 0.00
–655.35m (hook
lowering distance)
P19.16
,
P19.17
setting range: 0
–65535
P93.16
Enabling
upward/downward
limit position
check
0x00
–0x11
Ones place:
0: The upward limit position is not reached.
1: The upward limit position is reached.
Tens place:
0: The downward limit position is not reached.
1: The downward limit position is reached.
For example, when the upward/downward limit
position needs to be set manually, you can
enable the check of whether the
upward/downward limit position is reached.
When the hook reaches a certain distance from
the top, the upward limit position is reached,
P19.15
=0 (droop height); when the hook
reaches a certain distance from the ground,
=0 (distance from downward limit
position);
displays the distance between
the upward and downward limit positions. During
normal running between the upward and
displays the
downward limit position distance, while
P19.15
displays the upward limit position distance; if the
mechanism runs below the downward limit
position,
displays a negative value.
0x00
○
P93.17
Total height
measured
0.00
–655.35m (Total height measured from the
upward limit position to the downward limit
position)
0.00m
●
P93.18
Measured height
1
-50.00m
–655.35m
(The downward limit position is used as the
reference point. During downward limit,
0.00m
●
