INVT Goodrive350-19 Series, Руководство по эксплуатации

Страница: 228 / 524

Goodrive350-19 series VFD for crane Function parameter list
-216-
Function
code
Name Description Default Modify
P01.24 Stop speed delay 0.0
–600.0s
0.0s
○
P01.25
Open-loop 0Hz
output selection
0: Output without voltage
1: Output with voltage
2: Output with the DC braking current for stop
0
○
P01.26
DEC time for
emergency stop
0.0
–60.0s
2.0s
○
P01.27
Time of starting
segment of DEC
S curve
0.0
–50.0s
0.1s
◎
P01.28
Time of ending
segment of DEC
S curve
0.0
–50.0s
0.1s
◎
P01.29
Short-circuit
braking current
When the VFD starts in direct start mode
( P01.00 =0), set P01.30 to a non-zero value to
enter short-circuit braking.
During stop, if the running frequency of VFD is
lower than the starting frequency of brake for
stop ( P01.09 ), set P01.31 to a non-zero value to
enter short-circuit braking for stop, and then
carry out DC braking in the time set by P01.12 .
(Refer to the descriptions for P01.09
–
P01.12 .)
P01.29 setting range: 0.0
–150.0% (of the rated
VFD output current)
P01.30 setting range: 0.0
–50.0s
P01.31 setting range: 0.0
–50.0s
0.0%
○
P01.30
Hold time of
short-circuit
braking for start
0.00s
○
P01.31
Hold time of
short-circuit
braking for stop
0.00s
○
P01.32
Pre-exciting time
for jogging
0
–10.000s
0.000s
○
P01.33
Starting frequency
of braking for stop
in jogging
0
–P00.03
0.00Hz
○
P01.34 Sleep delay 0
–3600.0s
0.0s
○
P02 group
––Parameters of motor 1
Function
code
Name Description Default Modify
P02.00 Type of motor 1
0: Asynchronous motor (AM)
1: Synchronous motor (SM)
0
◎
P02.01 Rated power of 0.1
–3000.0kW
Model
◎