INVT GD310-011P-4-UL, Руководство по эксплуатации

Страница: 25 / 269

GD310-UL series VFD Installation guidelines
-17-
Environment Conditions
Storage
temperature
-30
–+60°C
Running
environment
condition
The installation site of the VFD should:
 keep away from the electromagnetic radiation source;
 keep away from contaminative air, such as corrosive gas, oil mist and
flammable gas;
 ensure foreign objects, such as metal power, dust, oil, water cannot enter into
the VFD (do not install the VFD on the flammable materials such as wood);
 keep away from direct sunlight, oil mist, steam and vibration environment.
Altitude
<1000m
When the installation site altitude exceeds 1000m, derate 1% for every increase
of 100m; when the installation site altitude exceeds 3000m, consult the local INVT
dealer or office.
Vibration
≤ 5.88m/s
2
(0.6g)
Installation
direction
The VFD should be installed on an upright position to ensure sufficient cooling
effect.
Note:
 Goodrive310-UL series VFDs should be installed in a clean and ventilated environment
according to enclosure classification.
 Cooling air must be clean, free from corrosive materials and electrically conductive dust.
4.2.2 Installation direction
The VFD may be installed in a cabinet.
The VFD must be installed in an upright position. Check the installation site according to the
requirements below. Refer to chapter Dimension drawings in the appendix for frame details.
a
Vertical installation
b
Horizontal installation
c
Transverse installation
OK NG NG
Figure 4-1 Installation direction of the VFD