8
4ch - Four Channel Surround
PRE AMP to AMPLIFIER If you are connecting from a pre-amp to the input of the Surround
Master, connect front and rear from the 4 CH SURROUND outputs of your Surround Master to
the inputs of your POWER AMP (multichannel, or 2x stereo amplifiers, 4 x monoblocks and so on)
DIRECT to AMPILIFIER If you are connecting directly from your source (CD, DVD etc) to the
input of the Surround Master, connect front and rear from the 4 CH SURROUND outputs of your
Surround Master to your receiver amplifier (multichannel) inputs.
IMPORTANT!
IF THE FRONT SWITCH IS SET
TO 2 CHANNEL MODE ON THE
SURROUND MASTER THEN YOU
MUST SET IT TO 4+ CHANNEL
MODE TO ENABLE ALL 4, 4.1, 5
or 5.1 MODES.
TO DO SO:
1) SWITCH THE SURROUND
MASTER OFF
2) CHANGE THE FRONT MODE
SWITCH TO 4 CH;
3) TURN THE SURROUND
MASTER BACK ON.
