viii
BANK1 BANK2:
in Dual mode SX8800 provides an easy slide switch to select which bank or “track” to be played.
Flip the switch to BANK1- the SX8800 will play the 1
st
mp3 file
Flip the switch to BANK2- the SX8800 will play the 2
nd
mp3 file
Example: BANK1 normal production
BANK2 “Holiday” production
During the playback you may flip the switch to Bank1 or bank 2 any time and device will play back that bank
repeatedly.
MODE:
files in the SD card
Single track
Multi track
Dual track
if you have a dual track production, the “keyedaudiofiles” are
specially prepared so that device plays that file only depending on the BANK switch.
SD (Secure Digital) CARD:
SX8800 can accept 256MB to 4GB SD cards available on the market.
Up to 256 hours of continuously playing audio time can be obtained using a 4GB SD card.
Most SD cards have a lock that needs to be in unlock position (toward the edge)
When in lock position(toward the bottom edge) the card will play but will not be accessible by PC to
be written into, this can provide protection against unwanted or accidental content change.
To remove the SD card, remove the Power 1
st
update it from your PC/Laptop then insert it back in
or insert a new SD card. Re-connect the power and the playback automatically resumes in a few
seconds.
Volume:
Turn the Volume control clock wise to increase the volume.
Turn the volume control counter clock wise to lower the volume.
TONE:
Very important on some phone systems, SX8800 provides the important Tone control to further
enhance the audio quality, turn the Tone control clockwise to increase the output frequency level
or counter clockwise to lower the frequency level.
BASS BOOST:
Use the switch BASS to add the low frequency dynamic range to the output
level. Turn the switch ON for BASS boost if desired.
SPEAKER:
Turn the speaker switch ON to hear audio from a speaker inside.
The speaker switch is to let you hear the audio from an internal speaker inside the SX8800, this is
only for monitoring or testing the audio, the volume levels heard at this time are not the actual audio
levels available to the MOH port,
If you are adjusting audio volumes at this time be sure to readjust it again when the calls are placed
on Hold to ensure the proper and desired audio volume levels.
audio1.mp3
keyedaudio1.mp3
keyedaudio2.mp3
audio1.mp3
Audio2.mp3
------
Audio99.mp3
P8
