vii
Disconnecting from Computer:
You may let USB Adapter (if any) remain connected to PC for future updates, just remove the SD card and
insert it into the player. The playback automatically starts. If you want to remove the USB adapter or the
player from the PC then do as follows
⇒
⇒
⇒
⇒
Double click on the green arrow in the Taskbar located on the lower -right side of the computer screen
(Safely Remove Hardware)
⇒
Select “USB Mass Storage Device” from the list that appears then click “Stop”
then press “OK”
⇒
⇒
⇒
⇒
When the “Safe to Remove Hardware” appears click OK and disconnect the USB adapter or player
from your PC.
(be sure to keep the USB adapter for future updates via PC)
If you are updating he SD card via a USB adapter on a PC, just unplug the SD card from the USB
adapter and insert it into the player, The USB adapter may remain connected to PC.
OUTPUT:
SX8800 has a dual output RCA connectors in case you want to connect it to a PBX phone system MOH
port, use the 8 ohm out put for louder, more power or when you need to connect external speakers, use
the 600 ohm output in some phone systems where a “hi-impedance” output works better. You may also
connect both.
In that case for example you connect the 600 ohm output to your MOH port and the 8 ohm to speaker
systems in the business. The 8 ohm output can drive up to 20 Watts of power into multiple speakers.
Live Streaming Audio Input:
SX8800 has a 3.5mm stereo input jack labeled as EXT
you may connect this jack to output of a XM satellite receiver
or any other external audio source such as a CD player, another digital player, iPOD, Radio, etc. for a live
streaming audio.
OUTPUT MODE:
Use the SD-EXT switch to select between the internal SD card playback
or the external audio connected to “EXT” jack. You can flip the switch at any time to simply switch the
output jacks to the other source. The SX8800 will amplify the external audio to the same level of up to 20
watts, adjust the output volume on the external source if needed in order to provide an equal level of output
power.
Modes of playback:
Two playback modes are automatically supported “Standard mode” and “Dual mode”
Standard Mode
: 1 to 99 tracks, device plays all the tracks one by one and re-loops automatically,
Silence any track by renaming it to
filename.ip3
instead of filename.mp3
(
tracks should not contain excessive silence)
Dual mode:
2 special tracks, device plays track1 when switch is
set to Bank1 and track 2 when switch is set to Bank2
To test the audio:
Turn the speaker ON
the provided speaker can be used to hear the audio playback any time,
P7
