involight VENTUS XS, Руководство пользователя

Страница: 13 / 41

12
1.3. Intended use:
The INVOLIGHT "VENTUS XS" is an LED effect light that combines a flower and a stroboscope effect. The
INVOLIGHT "VENTUS XS" can be operated in AUTO mode or in music mode. The product is intended for
professional applications, e.g. on stages, in discos, theaters, etc. and is not suitable for room lighting in
households. This product is only approved for connection to 100-240 VAC, 50 / 60Hz alternating voltage and has
been designed for indoor use only. The device must not be used or stored in an environment in which splash
water, rain, moisture or mist can be expected. Moisture or very high humidity can reduce the insulation and lead to
fatal electric shock. When using fog machines, please ensure that the device is never exposed directly to the fog
and is operated at least 0.5 m away from a fogger. Do not use the unit during a thunderstorm. Overvoltage could
destroy the device. Disconnect the appliance from the mains at all poles. Make sure there are no cables around.
You endanger your own and the safety of third parties! The ambient temperature must be between -5°C and +
45°C. Keep the unit away from direct sunlight and radiators. Do not operate the unit until after you have
familiarized yourself with its functions. Do not operate the appliance by persons who are not familiar with the
appliance. Please note that unauthorized modifications to the device are prohibited for safety reasons. If the
device is used in a different way than described in this manual, this can lead to damage to the product and to the
warranty claim. In addition, any other use is associated with dangers such as short circuit, fire, electric shock,
crashes, etc.
Part 2: Installation:
Unpack the unit and carefully check it for damage before using it. Place the unit in a suitable location or hang it on
a suitable crossmember. The device must be secured with an approved safety cable when the mounting is
suspended. In addition, the mounting bracket must be screwed and tightened with the enclosed screws! Then
connect the device to the power supply.
The appliance must not be operated directly after it has been brought from a cold to a warm room. The resulting
condensation may destroy your unit. Leave the unit switched off until it has reached room temperature!
During installation, the provisions of BGV C1 (formerly VBG 70) and DIN 15560 have to be observed! The
installation may only be carried out by authorized specialists!
IMPORTANT! Overhead mounting requires a high degree of experience. This includes knowledge of the load-
bearing capacity, the installation material used and the safety inspections of the material and the projector used,
but the required experience is not limited to this alone. Under no circumstances should you attempt to perform the
installation yourself if you do not have the appropriate qualification. Instead, commission a professional installer.
Incorrect installation may result in personal injury and / or damage to property.
NOTE!
Use of tripods.
When the unit is mounted on a tripod, be sure that the weight of the unit does not exceed the permissible load
of the tripod