involight SlimPAR644, Руководство пользователя

Страница: 23 / 47

22
AUTOMATIC CONTROL:
Press the "Menu" button repeatedly until the display shows
"Auto".
Now the unit plays the automatic
program. Press "Enter" again to select
"AU-1"
to
"AU-2"
. With the "Up" and "Down" buttons, you can
now set the desired automatic program.
MUSIC CONTROL:
Press "Menu" until
"Sound"
is displayed. Sound mode is activated. Press "Enter" again to select sound
program
"SO-1"
to
"SO-2".
With the "Up" and "Down" buttons you can now set the desired sound
program
PROCEDURE OF THE PROGRAM:
Press the "Menu" button until
"SPED"
appears on the display. The flow rate menu is displayed. Press "Enter"
again to select the speed
"SP-1"
to
"SP-9"
. With the "Up" and "Down" buttons you can now set the
desired speed of the program..
MICROPHONE SENSIBILITY:
The sensitivity with which the headlamp reacts to the music signals (bass impulses).Press the "Menu" button until
the display shows
"Sens".
The microphone sensitivity menu is displayed. Press "Enter" again to select the
microphone sensitivity
"SE-1"
to
"SE-9".
With the "Up" and "Down" buttons, you can now set the
desired microphone sensitivity. The height is the value, the more sensitive the microphone reacts to the music
signals (bass impulses) in the environment.
SILENT-MODE:
The Silent mode refers to the music-controlled operation and is also known as Intelligent Sound Control. If the
silent mode is activated "ON" and the microphone of the device does not receive any music signals (bass
impulses), the light beams of the device switch off (BLACKOUT). If the silent mode is deactivated "OFF", the
current program of the device will continue slowly, even if no further music signals (bass impulses) are received.
Press "Menu" until
"SILE"
is displayed. The menu for silent mode is displayed.
Press "Enter" again to select
"ON"
or
"OFF".
With the "Up" and "Down" buttons you can now activate the
silent mode "ON" or deactivate "OFF".
IRC-CONTROLLING:
Press the "Menu" key until the display shows
"INFR".
The IR remote control menu is displayed. Press
"Enter"
again to select
"ON"
or
"OFF".
With the "Up" and "Down" buttons you can now activate the
IR remote control "ON" or deactivate "OFF".
DMX-MODE:
To select the DMX mode and set the start address, press "Menu" button until the
"ADDR"
display appears.
Press "Enter" again to select
"2CH"
,
"3CH"
,
"4CH"
,
"4-1CH"
or
"8CH"
mode. Press
"Setup" again to select DMX start address
"d1"
to
"d512".
With the "Up" and "Down" buttons, you
can now set the desired start address.
MASTER/SLAVE-OPERATION:
The "SlimPAR644" can be linked to other devices. To set a device as a
„
Slave
“
, press the
„Menu“ button
until the display shows
„
Slav
“
. Confirm with the
„Enter“key. Select the desired program on the master
device. The interconnected devices are now working synchronously.