For installations with very long DMX cable paths or high electrical interference, such as in a
discotheque, it is recommended to use a DMX terminator. The DMX terminator is connected in an XLR
connector as a 120
Ω
resistor between pins 2 and 3 which is plugged into the last output socket of the
DMX line.
3.5 Connections in "Master / Slave" mode:
When you configure a group of devices in "Master / Slave" mode, the first device controls the others
and allows an automatic or music-controlled and synchronized show. This feature is especially useful
for starting a show without great Programing. Connect the DMX output of the master device to the
DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX
input of the second slave device and so on.
3.6 Stand-Alone-Operation:
The "PaintBAR HEX12P" can also be used in stand-alone mode without a DMX controller. Disconnect
the "PaintBAR HEX12P" from the controller and call the preProgramed program.
