4.
DMX address setting
Each fixture must set a specific starting address. When receiving signal transmission, fixture will
receive channel control signals which from the starting address.
According to different requirements or easy to use, the user can set many value fixtures to the same
address, also can set up a separate address for every device.
If you set the same address, all the devices will receive from DMX channels signal. All connecting
fixtures are jointly controlled, controller can't separate control a device.
If you set a different address, each device will be separate from its particular set the starting
address and begin accepting DMX512 control signal, so that more convenient separate control one
device. Using this method must be based on channel quantity of device to determine a starting
address.
This led light has 4 channels. you should set the starting address of the first unit to 1, the second
unit to 5(4+ 1), the third unit to 9 (4+ 5), and so on.
ООО «ИНВАСК»
Адрес: 143406, Московская область, Красногорск, ул. Ленина, дом 3 Б
Тел. (495) 565-0161 (многоканальный)
Факс (495) 565-0161, доб. 105 http://www.invask.ru e-
mail: [email protected]
Сервис-центр «ИНВАСК»
Адрес: 143400, Московская область, Красногорск, Коммунальный квартал, дом. 20 Тел.
(495) 563-8420, (495) 564-5228 e-mail: [email protected]
