involight FOG900, Руководство пользователя

Страница: 16 / 56

15
4.2 Cable remote control (X-2):
The device can be controlled with the cable remote control. Plug the cable remote control into the 5-pin connector
"Controller X-2" on the back of the device. (See section 4.1 Housing Backs).
1. Status LED:
Using the status LED, you can quickly see if your fog machine is ready for fogging or heating up.
2. Trigger button:
Press the "FOG" button. The machine generates fog until you release the "FOG" button.
4.3 Wireless remote control (transmitter W-1):
Your "FOG900" is also equipped with a radio remote control. This makes this fog machine very flexible. A
transmitter is included in the delivery (W-1). The receiver is already integrated into the housing. The remote has a
maximum range of 30 - 50m outdoors. So you can use the "FOG900" ideally also for theater or presentation
purposes.
If you want to use the wireless remote control for your "FOG 900", please pull the antenna completely out to ensure
a secure connection.
Part 5. Troubleshooting:
If there is too little fog, the pump makes noise, or if there is no fog at all, disconnect the unit immediately from the
power supply. Do not attempt to operate the unit further by pressing the activation button on the remote control, as
this can damage the unit. Check the liquid level, the external fuse and the remote connection, and make sure that
the wall socket is live. If these points are correct and the unit still does not work, contact a service technician.
1.
2.