involight A-000000-05912, Руководство пользователя

Страница: 15 / 28

14
Illustration 2 :
Backside:
Pos. Controls Function
10 POWER IN IEC mains power input socket with fuse holder for F1A 250V
fuse.
11 DMX512-Output 3-pin XLR connector for connection to the DMX input of the first
device.
12 PANEL Connector Connection for the optional remote control panel.
13 DMX512-Input Input for the DMX signal, for example from a DMX controller.
DMX-Connections:
Eine dreipolige XLR-Buchse dient als DMX-Ausgang, ein dreipoliger XLR-Stecker dient als DMX-Eingang.
For installations with very long DMX cable paths or high electrical interference, such as in a discotheque, it is
recommended to use a DMX terminator. The DMX terminator is connected in an XLR connector as a 120 O
resistor between pins 2 and 3 which is plugged into the last output socket of the DMX line.
2.2 Recording (REC):
1. Turn the unit on.
2. Use the / CHASE 1-7 / keys to select the desired memory location.
3. While holding down the / RECORD / key, press the / PLAY / key. The / RECORD / LED lights up and the
recording starts.
4. Press the / STOP / button to stop recording.
5. Repeat steps 2 through 4 to record additional CHASERS
10.
11. 12.
13.