involight A-000000-05428 Скачать руководство пользователя страница 17

16 

 

1.2 Overview of the meaning of the symbols and signal words: 

 
This information sheet contains important information on the safe operation of the device. Make sure that 
this information is available to everyone who uses this device. 

 
The type label is located on the underside of the device. 
 
Please  read  all  warnings  and  operating  instructions  carefully  before  starting  up  this  device.  Keep  these  operating 
instructions carefully for any questions that may arise later. Please follow all instructions in this manual carefully. 
 

DANGER!

 

 

 

Electric shock due to improper mains connection. 
 

The structure of this product corresponds to protection class I and may only be operated from a socket with a 
protective contact. Only use the power cord included in the scope of delivery for the connection. Do not make 
any changes to the mains cable or the mains plug and check the cable insulation regularly for damage. Failure 
to observe this can result in an electric shock, fire and danger  to life. If you are unsure, contact an authorized 
electrician.. 
 

 

DANGER! 

Electric shock due to high voltages inside the device. 
 

 

There  are  components  in  the  device to  which  a  high  electrical voltage  is  required  for  operation.  Do not  make 
any changes to the device and never remove covers. There are no components inside the device that can be 
serviced by the user. Failure to observe this can result in an electric shock, fire and danger to life.

 

 

NOTE! 

Disconnection from the mains. 

 

 

 

 

 

The mains plug is the main separating element. Disconnect the power plug to completely disconnect the device 
from the power source. Make sure that the socket is close to the device and easily accessible. 

 

WARNING! 

Operating conditions. 
 

 

This product is designed for indoor use only. 
To avoid damage, never expose the device to liquids or moisture. If there is any suspicion that liquid may have 
entered  the  device,  the  device  must  be  disconnected  from  the  mains  immediately.  This  also  applies  if  the 
device has been exposed to high humidity. Even if the device still seems to be working, it must be checked by a 
specialist whether insulation may have been impaired by the liquid ingress. Reduced insulation can cause fatal 
electric shocks. Avoid direct sunlight, heavy dirt and strong vibrations. 

 

WARNING! 

Eye injuries due to high light intensity. 
 

 

Never  look  directly  into  the  light  source.  Looking  directly  into  the  beam  can  cause  retinal  burns  and  must  be 
avoided. 
 
 

 

WARNING! 

Risk of an epileptic seizure. 
 

 

Avoid long periods of continuous flashing and especially flash frequencies between 10 and 20 flashes / second, 
since sensitive people may U. epileptic seizures can be triggered (especially applies to epileptics). 
 

 

NOTE! 

Risk of fire. 

 

 

 

Never cover the device or the ventilation slots. Do not mount the device directly next to a heat source. Keep the 
device away from open flames. 

 

WARNING! 

 

Do not leave the packaging material lying around carelessly. Plastic foils, polystyrene parts 
etc. could become a dangerous toy for children!

 

 

 

 
 

Содержание A-000000-05428




























Отзывы: