Invixium IXM TITAN, Руководство по установке

Страница: 4 / 34

For protection against ESD, which may cause damage or malfunction to the IXM device, Invixium recommends the use of the ground
connections between each IXM device and a high quality Earth Ground available at the install site. Please note that installation of any
IXM device should be performed by licensed electricians.
An Earth Ground wire with lug is provided in the IXM Install Kit. The lug of the Earth Ground wire should be fastened with a screw to the front
of the mounting plate. The other end of the Earth Ground wire should be connected to the high quality Earth Ground connection on site. When
the IXM device is installed onto the mounting plate, this Earth Ground lug will make direct contact with the Metal Back plate of the IXM device,
thus allowing for proper grounding.
Please refer to page 12 onwards for step-by-step instructions for mounting plate, device and Earth Ground wire installation.
Earth Ground
Earth Ground Wire Earth Ground
4
Copyright 2019
INVIXIUM