Invixium INGUIDE, Быстрый старт

Страница: 8 / 18

Input Voltage
INVIXIUM recommended PoE Injector Specs
90-264 VAC, 60 Hz
Input Current 0.4 A @ 100 VAC
Output Voltage 48 VDC
Output Current 0.32 A
Power 15.36 Watt
Power It Up
When using an external power supply, ensure
that the regulated, filtered and dedicated power
source (Safety tested, FCC/IC/CE certified)
provides a minimum of 1A @ 12 VDC for
MYCRO, SENSE 2 and TOUCH 2.
When using PoE for demo purposes, an IEEE
802.3af compliant Active Midspan Injector is
required (sold separately). Refer to table for
INVIXIUM recommended PoE Injector specs.
Full PoE deployments should include a
centralized PoE PSE. Both IEEE 802.3af
power transmission modes (A and B) are
supported.
INVIXIUM recommends the use of battery back up or a UPS with built-in surge protection.
WARNING: Product Warranty is void if improper power (under or over) is supplied to the device.
PoE+ connectivity is available on all SENSE 2 and TOUCH 2 models.