10
InvisibleFence.com
Multi-Area Avoidance:
Your Shields® Gate Transmitter and the Computer Collar® Unit are
preset to operate on
Channel A (Code A)
. For homes with two or more
pets, this setting is usually sufficient as long as all pets are required
to avoid the same protected areas like keeping all pets away from
the dining room, off the sofa, etc. In some multi-pet homes, it may be
desired to allow one pet access to an area while denying the same
access to another pet.
•
When set to Channel A (Code A)
, Shields Gate denies access
to pets wearing a Computer Collar programmed to Channel A.
(Channel A is the default setting for the Computer Collar® Unit.)
•
When set to Channel B (Code B)
, Shields Gate denies access to
pets wearing a Computer Collar programmed to Channel B.
•
When set to Channel A-B (Code A + B)
, Shields Gate denies
access to all pets wearing a Computer Collar® set to Channel A or B.
Note: Your local Invisible Fence® Brand dealer can set Computer
Collars to not activate to any Shields® units.
Programming the Computer Collar:
This function is only used with devices set to Shields mode.
• Prior to programming ensure all Computer Collar® units are
removed from pets and are at least 3 feet from the Shields
Gate or any Shields transmitter.
• Follow procedure on page 7, changing the Channel Setting on
Shields Gate to select
Channel A
or
Channel B
for programing
into the Computer Collar. Once complete turn the unit back
over and set it down on a flat surface.
Note: Shields Gate will
not enter into programming mode if this switch is set to A+B.
• Press and hold the
PROGRAM
(P)
button while lowering the
Computer Collar from directly above Shields Gate.
• Stop lowering when the Computer Collar® Unit begins to flicker
yellow and release the
PROGRAM
button on the transmitter
when the Computer Collar begins to flash green.
• The Computer Collar is now programmed to the desired channel.
• Verify operation by turning
ON
Shields Gate and moving the Computer Collar into the signal
field. You will hear the Computer Collar beep when it activates.
Note: Make sure any Computer Collar® units you do not wish to program are more than 3 feet from
Shields Gate or have the Power Cap® Battery removed. Do not perform this procedure while the
Computer Collar is on a pet.
