5
InvisibleFence.com
Operating Guide
Important: To ensure your pet does not receive an unintended correction, make sure your pet is not wearing
the Computer Collar® unit when turning ON or adjusting the Indoor Micro Shields® transmitter.
1. Charge the Indoor Micro Shields® Transmitter
• Lift the rubber cover protecting the charging jack located on the Indoor Micro Shields transmitter.
Connect the charger connector to the charging jack with the marked side facing up.
• Plug the AC adaptor (RAC00-13701) into a standard 120 volt wall outlet
• Allow the unit to charge a full 4 hours before initial use and after prolonged storage. A charge time of
2 hours is required after the initial charge for normal charging.
• When charging is complete remove the charger connector and replace the rubber cover.
• Battery life of approximately 30 days can be expected from a fully charged battery.
Note: Ensure the charger connector is inserted correctly into the Indoor Micro Shields® transmitter.
Insert the charger connector with the marked end of the plug facing up. If the charger connector is
plugged in backwards it could permanently damage the Indoor Micro Shields® transmitter and will no
longer work.
2. Turning On and Off
• Turn on by pressing RANGE UP (+) button.
• Turn off by pressing RANGE DOWN (-) button until LCD no longer displays signal field range.
Indoor Micro Shields®
Transmitter
Rubber Cover
Charger Connector
Illustration A