Fireplace 700 ECO
Reference: P600672
XD, 31/01/2020
Page 7 of 8
CARE ADVICE
After long idle periods, check that the flue is not obstructed before lighting.
When having the chimney swept, have the appliance checked by a qualified technician who will:
fully clean the appliance, check the connections of the different parts and the deflector position which is sloped and rests on the throat at the top and
is held down at the back.
if necessary, replace worn parts (door seal in particular)
SAFETY
•
When in use, all the appliance surfaces are hot: Beware of burns!! Avoid installing the appliance in a location where there is a lot of passage.
•
If a chimney fire were to break out, first close the loading door, then the primary and secondary air intakes, then immediately contact your
local fire & rescue services (In the UK, dial 999).
•
Never load the appliance with more wood than indicated in the “use advice” (i.e. less than half the combustion chamber height). Using the
appliance as an incinerator is prohibited.
•
The use of non-recommended fuels or fuel not adapted to it, including liquid fuels, is prohibited.
•
The combustion chamber should always remain closed, except during re-loading. Do not overheat the appliance.
