2
Thank you for purchasing Inverto’s advanced Unicable multiswitch and we are certain it will meet
your expectations. Before installing and operating the product, please read the following instruc-
tions and recommendations. We suggest that you keep this manual for future use.
Warranty
This Unicable multiswitch is designed for the distribution of satellite and terrestrial television and
radio signals in home installations. The warranty does not apply for products used for other pur-
poses than those specified herein. The user/installer shall be responsible for any damage incurred
as a result of not using the product according to the instructions in this manual.
Installation location
The product shall be installed on a wall or other hard inflammable surface.
The product shall be in no case held only with the connected cables.
Place the product in a dry environment where it is not exposed to rain or running water.
Do not install the product close to heat sources or in places exposed to direct sunlight.
Product installation
The following diagram may assist you when drilling the holes:
To connect the product inputs and outputs use high-qual-
ity coaxial cables designed for satellite reception and
F-connectors. Use a high-shielding coaxial cables with
minimum 90dB. If you use wall sockets to loopthrough
the 8 user bands, make sure the wall sockets were de-
signed for satellite reception compatible with Unicable
technology and allows bidirectional signal propagation.
The Multiswitch shall be powered using the supplied
AC/DC power adapter over its +20V DC input.
The following diagram describes the installation configurations supported by the product:
151
110
User Bands:
0 : 1076.06MHz 4 : 1484.30MHz
1 : 1178.12MHz 5 : 1586.36MHz
2 : 1280.18MHz 6 : 1688.42MHz
3 : 1382.24MHz 7 : 1790.48MHz
Satellite inputs: IF 950 - 2150MHz
Terrestrial input: 47 - 862MHz (Combined over Unicable and Legacy outputs)
Satellite/Terrestrial Loop-Through loss: 3dB
Unicable cascadable switch
with 8 User Bands, Terrestrial input and 1 Legacy port
IDLU-UST112-CUO1O-8PP
Item: 5050
M a d e i n C h i n a
D e s i g n e d i n L U
22.80
Quattro
LNB
Ter
mina
ted
O
utputs
x8 User bands
UB 7 UB 5 UB 3
UB 6 UB 4 UB 2
UB 0
UB 1
x8 User bands
UB 7 UB 5 UB 3
UB 6 UB 4 UB 2
UB 0
Legacy
Legacy
UB 1
AC/DC
power adapter
AC/DC
power adapter
User Bands:
0 : 1076.06MHz 4 : 1484.30MHz
1 : 1178.12MHz 5 : 1586.36MHz
2 : 1280.18MHz 6 : 1688.42MHz
3 : 1382.24MHz 7 : 1790.48MHz
Satellite inputs: IF 950 - 2150MHz
Terrestrial input: 47 - 862MHz (Combined over Unicable and Legacy outputs)
Satellite/Terrestrial Loop-Through loss: 3dB
Unicable cascadable switch
with 8 User Bands, Terrestrial input and 1 Legacy port
IDLU-UST112-CUO1O-8PP
Item: 5050
M a d e i n C h i n a
D e s i g n e d i n L U
User Bands:
0 : 1076.06MHz 4 : 1484.30MHz
1 : 1178.12MHz 5 : 1586.36MHz
2 : 1280.18MHz 6 : 1688.42MHz
3 : 1382.24MHz 7 : 1790.48MHz
Satellite inputs: IF 950 - 2150MHz
Terrestrial input: 47 - 862MHz (Combined over Unicable and Legacy outputs)
Satellite/Terrestrial Loop-Through loss: 3dB
Unicable cascadable switch
with 8 User Bands, Terrestrial input and 1 Legacy port
IDLU-UST112-CUO1O-8PP
Item: 5050
M a d e i n C h i n a
D e s i g n e d i n L U
