Inverto Multibox IDL 400s Скачать руководство пользователя страница 6

24

This brief setup manual describes the installation and configuration of your Multibox SAT>IP Server device. 

For further information please visit 

www.inverto.tv/multibox.

notices

CopyrIght

State

ment (Copyright © 2013 Inverto Digital Labs) – Not to be copied, used or translated in part or whole without 

Inverto prior consent in writing except approval of ownership of copyright and copyright law.

Warranty

This warranty does not cover parts which may become defective due to misuse of the information contained in this 

manual. Read this manual carefully and make sure you understand the instructions provided. Please retain the 

original packaging, should it be necessary at some stage to return the unit.

 

Ce MarK For eUropean harMonISeD StanDarDS

The CE mark which is attached to these products means it conforms to EMC Directive (2004/108/EC), Low Voltage 

Directive (2006/95/EC) and to the RoHS Directive (2011/65/EC).

Weee ConSUMer notICe

The Inverto Digital Labs S.a.r.l. product you have purchased is subject to Directive 2002/96/EC of the European 

Parliament and the Council of the European Union on waste electrical and electronic equipment (WEEE) and, in 

jurisdictions adopting that Directive, is marked as being put on the market after August 13, 2005, and should not 

be disposed of as unsorted municipal waste. Please utilize your local WEEE collection facilities in the disposition of 

this product and otherwise observe all applicable requirements. For further information on how to properly dispose 

of your product and for information specific to your country, please contact your vendor or visit the “Support” sec

-

tion of our website: www.inverto.tv/support

Disposal of Old Electrical and Electronic Equipment (Applicable in the European Union and other Euro

-

pean) countries with separate collection systems

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. 

Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equip-

ment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences 

for the environment and human health, which could otherwise be caused by inappropriate waste handling of this 

product. The recycling of materials will help to conserve natural resources. For more detailed information about 

recycling of this product, please contact your local Civic Office, your household waste disposal service, or the shop 

where you purchased the product.

Safety notices

WarnIng:

For your safety, be aware of the following precautions:

RISK OF ELECTRIC SHOCK

DO NOT OPEN

caution

!

• 

To prevent electric shock,do not remove cover. 

• 

No user serviceable parts inside. 

• 

Refer servicing to qualified service personal.

Содержание Multibox IDL 400s



























Отзывы: