Version 1.02
| Optipad TFT Remote Keypad IP55 User Guide |
5
www.invertekdrives.com
Changing the Display Language
STOP
Select Language
Select Language
Español
Deutsch
English
Español
Deutsch
English
Hold down the Start and
Up keys for >1s
Use the Up and Down
arrows to select a
language.
Press the Navigate button
to select.
Operating Displays
Inhibit /
STO Active
Drive Stopped
Drive Running
Output Frequency
Display
Drive Running
Output Current
Display
Drive Running
Motor Power
Display
Drive Running
Motor Speed
Display
Name 01 Name 01 Output Frequency 01 Motor Current 01 Motor Power 01 Motor Speed 01
INHIBIT
STOP
23.7Hz
15.3A
6.9kW
718rpm
15kW 400V 3Ph 15kW 400V 3Ph 15.3A
6.9kW 6.9kW
23.7Hz 23.7Hz
15.3A 23.7Hz
15.3A
Drive Inhibited. The
STO connections
are not made.
Drive Stopped /
Disabled.
Drive is enabled
/ running, display
shows the output
frequency (Hz).
Press the Navigate
key to select
alternative displays.
Press the Navigate
key for < 1 second.
The display will
show the motor
current (Amps).
Press the Navigate
key for < 1 second.
The display will
show the motor
power (kW).
If P1-10 > 0,
pressing the
Navigate key for
< 1 second will
display the motor
speed (Rpm).
Additional Display Messages
Auto Tuning in Progress External 24VDC Supply
Overload
Fire Mode
Name 01 Name 01 Fire Mode
Auto-tuning
Ext 24V
OL
23.7Hz
External 24V mode
15.3A
6.9kW
Auto tune in progress.
The drive control board
is powered only from an
external 24 Volt source,
with no mains power
applied.
Indicates an Overload
condition. Output current
exceeds the motor rated
current.
Display shows 'Fire Mode'.
