6 Device configuration
To configure the device use the Inveo
RFID M1 / U1 Configurator
software, which
allows you to define the basic functions of the device. The program can be downloaded
from
.
After installing the
RFID M1 / U1 Configurator
configuration program and starting it,
connect the USB cable to the computer and the module (in this case, the external power
supply of the module is not required – the device is powered via the USB port).
The first line of the program window displays information about the version of the
configuration program –
PC version
, reader software version –
RFID Software
and
reader version –
RFID Hardware
.
It is also an information on whether the configuration program was connected to a reader
Connected
/
Not connected.
User manual RFID IND Modbus Mif
Page
9
z
22
[B03]
