Power ON
– the state of the output after powering the device
•
Active –
output enabled,
•
Inactive
– output disabled.
State –
visualization of the output, if a rectangle is yellow it means that the output
current is turned on.
Buttons
Out 1
and
Out 2
outputs can activate or deactivate the output.
Active Relay on Card –
if the TAG will be read, the output enables.
To set the duration of the active output it is necessary to select the
TIME
mode and set
appropriate Time ON.
6.2
Inputs
Fields
STATE INPUT 1
and
STATE INPUT 2
displays the actual state of inputs. Square
field in black – input inactive, field in yellow – active input.
6.3
LEDs and sound signaling control
The
RFID M1/U1 Configurator
allows user to customize visual and sound indication.
All you have to do is select the appropriate configuration settings and upload it to the
module.
Two options can be set for the Buzzer:
•
OFF – signaling device switched off,
•
ON – sound signaling at the moment of reading the TAG.
The device has 3 LEDs:
•
Power supply diode, green LED,
•
LED 1 – red LED,
•
LED 2 – green LED.
Regardless of the selected setting, it is always possible to control the signaling
via the Modbus RTU protocol.
User manual RFID IND Modbus Mif
Page
11
z
22
[B03]
