6 Module configuration
If using the module for the first time it is needed to configure it as shown below
6.1
Changing the PC setting for module configuration.
After connecting the module to the network there is a need to change the PC setting. In
order to do that navigate to: Start->Control Panel->Network connections.
Then right click on the current network connection and click „Properties”.
The configuration screen as shown below should be visible on the screen:
Choose the „Internet Protocol (TCP/IP)” and press „Properties”:
TCP/IP example settings
Tick the box „Use the following IP address” and enter:
IP address:
192.168.111.1
Subnet mask:
255.255.255.0
The rest of the setting can be left blank.
Press OK to accept the changes.
User manual NANO IN
Page
9
of
22
Содержание NANO IN
Страница 22: ...Notes...
