![inventum VVW5520 Скачать руководство пользователя страница 29](http://html.mh-extra.com/html/inventum/vvw5520/vvw5520_instruction-manual_2084468029.webp)
To find out the water hardness level in your area, contact your local water company. Adjust the salt consumption according
to the table on the next page.
Note!
Hardness level is adjusted to level 4 as a factory setting.
• Turn the machine on.
• Press and hold the
Start/Pause
-button for 5 seconds to enter the mode for setting the salt consumption. This must be
set within 60 seconds after turning the machine on.
• Set the level of water hardness by pressing the
Start/Pause
-button repeatedly. Use the
table of water hardness level
settings
.
• After adjusting the level of water hardness, press the
On/Off
button to confirm and store the setting.
Table of water hardness level settings
Water
hardness
level
German hardness
°dH
1)
International
indication hardness
mmol/l
2)
Program indicator
hardness level
H1
0-5
0-0.9
●
indicator light RINSE on
H2
6-11
1.0-2.0
●
indicator light FAST 90 MIN on
H3
12-17
2.1-3.0
●
indicator light FAST 90 MIN on
●
indicator light RINSE on
H4 *
18-22
3.1-4.0
●
indicator light DELICATE on
H5
23-34
4.1-6.1
●
indicator light DELICATE on
●
indicator light RINSE on
H6
35-45
6.2-8.0
●
indicator light DELICATE on
●
indicator light FAST 90 MIN on
1)
German degree of measurement for the water hardness
2)
millimol, international unit for water hardness
*
factory setting
Prior to using the machine for the first time please check whether the electricity and supply water specifications match the
values indicated by the installation instructions for the appliance.
Remove all packaging materials inside the machine.
Fill the salt reservoir and fill up with water until it almost overflows. Set the water hardness setting.
Fill the rinse aid reservoir.
For a good washing result, the dishwasher needs soft, i.e. less calcareous water. Otherwise, white lime residues will remain
on the dishes and the interior of the dishwasher. This has a negative effect on your applinace’s washing, drying and shining
performance. For this purpose, dishwasher salt is used.
• Remove the basket and unscrew the cap of the salt reservoir (1).
• Fill with salt till the overflow level, about 1.0 kg (2).
• Fill the reservoir before first use with water. It is normal for a little water to flow out of the opening when doing this.
• Screw the cap back on firmly.
ATTENTION!
• Remove any spilled salt and run a full program
to prevent corrosion to the bottom.
• Refill the salt reservoir when the indicator light
of the salt reservoir lights up.
before first use
3
FILLING THE SALT RESERVOIR
SETTING THE SALT CONSUMPTION
1
Open
2
English
•
29
Содержание VVW5520
Страница 2: ...2 ...
Страница 87: ... 87 ...