appliance description
2
before the first use
3
Before you use the appliance for the first time, please do as
follows: Carefully unpack the appliance and remove all the
packaging material. Keep the material (plastic, polystyrene and
cardboard) out of reach of children. Check the appliance after
unpacking for any damage, possible from transportation. Place
the appliance on a flat and stable surface. Make sure there is
enough open space around the appliance for the intake and/or
outlet vents. A minimum clearance of 10 cm is required between
the appliance and any adjacent walls. The freezer needs good
ventilation for easy dissipation of heat, high efficiency of
refrigeration and low power consumption.
You can level the appliance using the adjustable feet.
Do not place the appliance near a heat source such as a heater
or furnace.
Mount the enclosed handle on the desired side of the door
with the enclosed screws and place the enclosed caps on the
other side for a nice finish. Attention: never lift the freezer by
the handle.
Leave the appliance to stand for at least 3 hours before you
insert the plug into the socket.
First clean the interior of the appliance. Use warm water and a
neutral detergent. After cleaning, rinse the interior with clean
water and rub dry. Leave the appliance to dry for 1 to 2 hours.
The appliance features internal controls. Set the thermostat
on setting 3. Check that the voltage in your home corresponds
with the voltage printed on the back of the appliance and plug it
in a socket. The appliance now cools continuously until the set
temperature has been reached. Do not place anything in the
freezer until the set temperature is reached. This usually takes
2 or 3 hours. Then set the thermostat at the desired setting and
place food into the freezer.
using freezing compartment
4
The freezer compartment enables you to preserve frozen food,
freeze fresh produce and to produce ice cubes.
Setting MIN = minimal cooling, warm
Setting MAX = maximal cooling, cold
In general setting “NORMAL” is used for freezing.
Check that the voltage in your home corresponds with the
voltage printed on the back of the appliance and plug it in a
socket. The appliance now cools continuously until the set
temperature has been reached. Do not place anything in the
freezer until the set temperature is reached. This usually takes 2
or 3 hours. Then place food into the freezer.
Note:
The ambient air temperature, how often the door is opened
and the position of the appliance can affect the internal
temperature. These factors must be taken into account when
setting the thermostat.
• Do not freeze too large an amount of food at one time;
the faster the food is frozen, the longer is preserves its
qualities.
• Do not put hot food into the freezer.
• Never introduce volatile, inflammable or explosive fluids
such as alcohol, acetone or petrol because of the risk of
explosion.
• Do not store glass bottles or containers with liquids in
1.
Top panel
2. Thermostat
3. Handle
4. Adjustable feet
5. Freezer compartments
VR601 - 3 lades
VR551 - 4 lades
3
2
5
1
5
5
4
4
English
•
15
VR552-VR601-instructions-0115.indd 15
26-1-2015 13:56:16
