inventum HN138i, Инструкция по эксплуатации, Страница: 17 / 40

cleaning & maintenance
5
4.4 Setting the temperature
Setting 0: OFF
Setting 1: minimum heat
Setting 2: medium heat
Setting 3: maximum heat
CAUTION
If the heated underblanket is used continuously (for several hours)
it is recomended to use the lowest setting (1) of the control to avoid
the body overheating and thereby any potential burns to the skin or
heat stroke.
NOTE
• The foot area of this heated underblanket is heated to a greater temperature than the rest of the heated underblanket.
• The quickest way to heat up the heated underblanket is to select the highest temperature setting of the control, first.
• We strongly recommend switching on the heated underblanket approx. 30 minutes before going to bed and
covering it with the quilt to prevent the warmth from escaping.
WARNING
Always remove the supply plug from the mains outlet and remove the control from the heated underblanket by
disconnecting it at the connector. Otherwise there is a risk of an electric shock.
CAUTION
The control must never get in contact to water or other liquids. Otherwise, the control may be damaged.
• To clean the control, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
• Small marks on the heated underblanket can be removed with a damp cloth or sponge, or if necessary, with a little liquid detergent
for delicate laundry.
4.6 Switching off
To switch off the heated underblanket, set the slider for ON/OFF and temperature settings to the OFF (0) position. The temperature
settings are then no longer illuminated.
NOTE
If the heated underblanket is not used for several days, set the slider for ON/OFF and temperature settings to the OFF
(0) position and remove the mains plug from the socket. Then remove the control from the heated underblanket by
disconnecting it at the connector.
4.5 Automatic switch off
This heated underblanket switches off automatically after 3 hours. Once the heated underblanket has switched off, it is no longer
heated and the control light for temperature settings flashes.
To switch on the heated underblanket again, first set the ON/OFF switch to the off ( 0 ) position for 5 seconds. Then set the ON/OFF
switch back on to the desired temperature setting.
4.3 Switching on
To switch on the heated underblanket, set the slider for ON/OFF and temperature settings to setting 1, 2 or 3. The temperature setting
is illuminated when switched on.
English •
17