inventum CKK500, Инструкция по эксплуатации, Страница: 24 / 32

reversing the door opening
9
It is possible to change the door opening from either the left or the right side. To change the opening direction, please follow
these instructions.
Note: Before reversing the door swing, set the thermostat off to [ 0 ] and unplug the appliance from the mains. Empty the
appliance, including the shelves before reversing the door opening.
• Remove the cover plates [1] and the screws [2].
• Lift the top panel [3] and the cover plate [4] of the appliance.
• Remove the top hinge, the screws [5] and the hinge [6].
• Remove the door by carefully lifting it from the bottom hinge.
Put the door in a safe place.
• Remove the plug [7] from the top of the door and place it on
the opposite side.
• Remove the screws [8] and the bottom hinge [9].
• Unscrew the adjustable leg [10] and place it on the opposite
side.
• Place the bottom hinge [9] on the opposite side with the
screws [8]. Also place the adjustable leg at the right position.
• Place the door against the appliance and make sure it is well
fitted on the bottom hinge.
• Place the upper hinge [6] on the opposite side with the screws
[5].
• Place the cover plate [4] on the opposite side in the top panel
[3].
• Place the top panel [3] and fit it with the screws [2]. Refit the
cover plates [1].
• Make sure the door is alligned with the outside of the
appliance.
• Level the appliance with the adjustable legs.
• Leave the appliance to stand for at least 3 hours before
you insert the plug into the socket.
cross shaped screwdriver
thin-blade screwdriver
socket driver
1
2
3
4
5
6
7
9
8
10
reversing the door opening of the freezer -
only applicable for model CKV500
• Open the door of the freezer compartment a little. Using
a small screwdriver, press the spring in the opening of the
lower door bearing and remove the door.
• Place the covering cap
[M]
on the opposite side.
• Turn the door of the freezer compartment 180 degrees
and fit the lower door bearing into the lower door bearing
cavity of the freezer compartment door.
• Fit the door in the upper door bearing and at the same
time insert the lower door bearing into the square hole.
24
• English