operating the appliance
4
cleaning and maintenance
5
Before performing any maintenance operation, disconnect the cooker hood from the mains power supply. Ensure
that it is switched off and pull the plug or remove the connector fuse.
Clean the in- and outside of the cooker hood regularly. Clean the cooker hood with warm soapy water and a soft cloth. If your
model is stainless steel, clean it with a stainless steel care product. Do not use any abrasive cleaning agents such as powder
cleaners or cleaners that contain alcohol. Clean the controls only with a damp cloth.
Attention:
failure to carry out the basic cleaning recommendations can cause fire risks.
GREASE FILTERS
A metal grease filter filters the grease particles in the air. Therefore, the filter can get clogged, depending on the use. The
metal grease filter does not have to be replaced, but should at least be cleaned once a month. You can clean it either by
hand or in the dishwasher on a low temperature. Make sure the grease filters are completely dry before placing them back.
Do not use any abrasive cleaning agents.
Not cleaning the grease filters on time can cause fire risks.
Cleaning the grease filters in the dishwasher can cause discoloration. This has no effect on the operation.
REMOVING THE GREASE FILTER
Switch off the electricity! Remove the plug from the socket.
Pull the grease filter towards you and tilt it downwards at the front.
Make sure you guide the grease filter with your other hand to prevent
the grease filter from falling down on your cooking appliance.
REPLACING THE CARBON FILTERS
A carbon filter cleans the air and filters the smell that occurs during cooking. A
carbon filter can not be washed and reused. In all cases, it is necessary to replace the
carbon filter at least every four months.
• Remove the grease filters.
• Attach two carbon filters to the grease filters.
• Replace the grease filters.
SWITCHING THE COOKER HOOD ON AND OFF
• Press
0
to turn the motor off.
• Press
1
and the motor runs at the lowest speed.
• Press
2
and the motor runs at the middle speed.
• Press
3
and the motor runs at the highest speed.
• Press and the lighting switches on. Press the button again to switch the lighting off.
Switch the lighting on if you need more light on your cooking appliance. It is recommended to operate the appliance a few
minutes prior to cooking. Leave the appliance in operation for 5 to 10 minutes after the cooking is finished to remove all the
smells from the kitchen.
4
English
•
19