INVENTOR RG66B4(2H)/BGEF, Руководство пользователя

Страница: 4 / 44

4
Function Buttons
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the How to Use The Basic/Advance Functions section of
this manual.
NOTE:
Please do not select HEAT mode if the machine you purchased is cooling only
type. Heat mode is not supported by the cooling only appliance.
ON/OFF --­
Turns the unit on or off
MODE
Scrolls through operation
modes as follows:
AUTO ➔ COOL➔ DRY➔
HEAT➔ FAN
ECO/SLEEP
Starts and stops energy
efficient feature. If hod
down this button for
more than 2 seconds,
the sleep feature is
activated.
TIMER
Sets timer to turn unit on
and off(see How to Use
Basic Functions for
instructions)
LED
Turns indoor uhit's LED
display on and off.
FOLLOW ME
Temperature sensing and
room temperature display
button.
TURBO/FRESH-----�
Enables unit to reach preset
temperature in shortest
possible time. If hold down
this button for 2 seconds,
the Fresh feature is activated.
INTELLIGENT EYE
Detects the people activities
in the room.
Model: RG66B4(2H)/BGEF
FAN
Selects fan speeds in
the following order:
AU% ➔20%➔40%➔
60%➔ 80%➔F%(100%).
Press the Adjust
+
or - button to increase
/decrease the fan
speed in 1 % increments.
TEMP+
Increases temperature in
1
°
F(0.5
°
C) increments for
each press. If pressing
and holding down this
button, the temperature
will increase in 1
°
F(1
°
C)
increments.
Max. Temperature is
86
°
F(30
°
C).
TEMP-
Decreases temperature
in 1
°
F(0.5
°
C) decrements
for each press. If pressing
and holding down this
button, the temperature
will decrease in 1
°
F(1
°
C)
decrements.
Min. temperature is
60
°
F(16
°
C).
SWING�
Starts and stops horizontal
louver movement.
SWING ◄►
Starts and stops vertical
louver movement.
SELF CLEAN
Starts and stops the unit
self clean feature.
HANDLING THE REMOTE CONTROLLER
NOT SURE WHAT A FUNCTION DOES?
Refer to the
How to Use Basic Functions
and
How to Use Advanced Functions
sections of this manual for a detailed
description of how to use your air conditioner.
SPECIAL NOTE
• Button designs on your unit may differ
slightly from the example shown.
• If the indoor unit does not have a particular
function, pressing that function's button on
the remote control will have no effect.
INSERTING AND REPLACING BATTERIES
Your air conditioning unit comes with two
AAA batteries. Put the batteries in the
remote control before use:
1 . Remove the back cover from the remote
control, exposing the battery compartment.
2. Insert the batteries, paying attention to
match up the ( +) and (-) ends of the
batteries with the symbols inside the
battery compartment.
3. Install the back cover on.
0
BATTERY NOTES
For optimum product performance:
• Do not mix old and new batteries, or
batteries of different types.
• Do not leave batteries in the remote control
if you don't plan on using the device for
more than 2 months.
1'
BATTERY DISPOSAL
Do not dispose of batteries as unsorted
municipal waste. Refer to local laws for
proper disposal of batteries.
Q
TIPS FOR USING REMOTE CONTROL
• The remote control must be used within 8
meters of the unit.
• The unit will beep when remote signal is
received.
• Curtains, other materials and direct
sunlight can interfere with the infrared
signal receiver.
• Remove batteries if the remote control
will not be used more than 2 months.
• Prevent any liquid from falling into the
remote controller.
• If other electrical appliances react to the
remote controller, either move these
appliances or consult your local dealer.
D
Remove the back cover
to install batteries
@
000
000
000
Put the remote controller
in the holder.