INVENTOR GLX06010, Руководство пользователя

Страница: 7 / 72

7
SAFETY INSTRUCTIONS
•
Do not operate the machine in rooms with a temperature of below
5°C. This can cause damages to parts of it. If it is unavoidable, make
sure to drain the water completely from the appliance after every
use (see “Maintenance - Cleaning of drain pump filter“) to avoid
damages caused by frost.
•
Never use flammable sprays or substances in the immediate
proximity of the appliance.
INSTALLATION
•
Remove all packaging material and transport bolts before using the
appliance. Otherwise, serious damage may result.
•
This appliance is equipped with a single inlet valve and can be
connected to the cold water supply only.
•
Mains plug must be accessible after installation.
•
Before washing clothes for the first time, the product shall be
operated once throughout all the procedures without any clothes
inside.
•
Before using the washing machine, the product shall be calibrated.
•
Do not put any excessively heavy objects on the appliance, like
water containers or heating devices.
•
The new hose-sets supplied with the appliance are to be used and
that old hose-sets should not be reused.
•
Max. Inlet water pressure 1 MPa. Min. inlet water pressure 0.05
MPa.
ELECTRICAL CONNECTION
•
Make sure the supply cable is not trapped by the machine, it can get
damaged.
•
Connect the product to a grounded outlet protected by a fuse
complying with the values in the “ Technical specifications“ table.
The grounding installation has to be made by a qualified electrician.
Ensure that the machine is installed in accordance with the local
regulations.
SAFETY INSTRUCTIONS
•
Water and electrical connections must be carried out by a qualified
technician in accordance with the manufacturer‘s instructions and
local safety regulations.
•
Don´t use multiple plugs or extension cords.
•
The appliance must not have an external switching device such as a timer or
connected to a circuit that is regularly switched on and off.
•
Do not pull the plug out of the mains outlet if there is flammable gas around.
•
Never pull out power plug with wet hands.
•
Always pull at the plug, not at the cable.
•
Always unplug the appliance if it is not being used.
Warning!
！ ！
WATER CONNECTIONS
•
Check the connections of the water inlet tubes, the water tap and
the outlet hose for possible problems due to changes of water
pressure. If the connections loosen or leak close the water tap and
get it repaired. Do not use the appliance before the pipes and hoses
are installed properly by qualified persons.
•
Glass door may become very hot during the operation. Keep
children and pets far away from the machine while it is operating.
•
The water inlet and outlet hoses have to be safely installed and
remain undamaged. Otherwise, water leakage can occur.
•
Do not remove the drain pump filter while there is still water in the
appliance. Big quantities of water can leak out, and there is a risk of
scalding due to hot water.