INVENTOR DR2VI32-09WFI, Руководство пользователя

Страница: 11 / 88

9
Operation
HEALTH Operation
ON/OFF operation and test operation
ON/OFF Operation:
Use this operation only when the remote controller is
defective or lost. For the Emergency Operation, use only
for a limited time.
When the emergency operation switch is pressed,
a sound is heard once, which means the start of this
operation.
emergency operation starts, the unit will run automatically in
the following modes:
The Ionizer generates ions in
the air, and helps provide better
air quality by killing bacteria and
speeding up the dust sediment
in the room.
Room Designated Timer Fan Operation
temperature temperature mode speed mode
Above 24 ºC 24 ºC No AUTO COOL
Below 24 ºC 24 ºC No AUTO HEAT
Press HEALTH
button
It is impossible to change the settings of temp. and fan
speed, It is also not possible to operate in timer or dry mode.
FAN MODE
Test operation:
T
est operation switch is the same as emergency switch.
Use this switch in the test operation
when the room temperature is below
16 ºC, do not use it in the normal
operation.
Continue to press the test operation
switch for more than 5 seconds.
After you hear a beep sound twice,
Loading of the battery
Pressing the HEALTH button again will
deactivate the ionizer operation.
1
Remove the battery cover;
Load the batteries as illustrated. 2 R-03 batteries,
resetting key (cylinder); Be sure that the loading is
in line with the “+”/“-”;
Load the battery, then put on the cover again.
2
When indoor fan motor is running, it has healthy
process function. (It’s available under any mode)
When the fan in the indoor unit does not work, the
health lamp lights up, but the anion generator does
not release anion.
3
Pressing the HEALTH button
once, is displayed on the
remote controller and the
ionizer operation starts