INVENTOR DE-GDNM10, Руководство пользователя

Страница: 6 / 16

This unit has 3-min lag due to the device for protecting circuit .In order to prolong the compressor's
If the ambient temperature is too low the unit will automa-
carefully remove the tank and empty the collected water.
To empty the unit, first unplug from power source then
The lamp will illuminate when the water container is full.
the bucket full lamp illuminates when the unit is first
1.�Ensure that the unit is connected to the power socket.
Defrost Lamp
tank with two hands
Start Operation
OPERATING INSTRUCTIONS
2.�Make sure the water tank is correctly positioned.(If
switched on, remove the tank and replace it .)
(NORMAL)or CONTINUOUS to work
3.�Turn the humidity control knob to the desired setting
clogged.
tically start to defrost and the light will illuminate. The
defrost lamp will also illuminate if the air filter becomes
4.�The unit will shut down when turned to OFF position.
Replace the bucket carefully before switching the unit on
again.
Full Bucket Lamp
Do not use the extension cord or the same socket with other electric appliance.
working life, the compressor will not start until the unit has run for 3 minutes.
Remove the water in the water
RUNNING
DEFROST
FULL
While turning on ( or off ) the machine , the defrost lamp would be bright once .
4