INVENTOR APSI-30, Руководство пользователя

Страница: 7 / 27

遥控器各按键的名称及作用
５
Name and function of wireless remote control
ON/OFF button
Remote control
Signal transmitter
AUTO
COOL
DRY
FAN
(
O
nly for cooling and heating unit
.
)
Don't drop or throw the remote control; Don't let any liquid in the remote control and
Note: Be sure that there are no obstructions between receiver and remote
controller
;
put the remote control directly under the sunlight or any place where is very hot.
●
Press this button, Auto, Cool,Dry, Fan,
Heat mode can be selected circularly.
MODE button
MODE
Auto mode is default while power on.
Under Auto mode,the temperature will not
be displayed; Under Heat mode, the
●
Press this button, Sleep On and Sleep
Off can be selected. After powered on,
SLEEP button
SLEEP
Sleep Off is defaulted. After the unit is
turned off, the Sleep function is canceled.
After Sleep function set up, the signal of
Sleep will display. In this mode, the time of
timer can be adjusted. Under Fan and Auto
modes, this function is not available.
●
Press this button, Auto, Low, Middle, High
speed can be circularly selected. After
FAN button
FAN
powered on,Auto fan speed is default.
Under
Dehumidify
mode, Low fan speed
only can be set up.
CLOCK button
CLOCK
●
Press this button, can set up temperature:
presetting temperature (to display room),
TEMP button
TEMP
indoor ambient temperature (to display
indoor temperature), outdoor ambient
temperature (to display outdoor temperature),
and that will go around. It is defaulted that
Operation of wireless remote control
●
Press this button, the unit will be turned on,
press it once more, the unit will be turned
off. When turning on or turning off the unit,
the Timer, Sleep function will be canceled,
HEAT
initial value is 28
℃ ;Under other
modes, the initial value is 25
℃ ．
（
ｏ
Ｆ）
82
（
ｏ
Ｆ） 77
there is no signal displaying. Remark:when
operating this button,the wireless remote
control displays the presetting temperature
all along.
Middle fan
Low fan
High fan
but the presetting time is still remained.
● Press this button, the clock can be set up,
signal blink and display.Within 5
seconds, the value can be adjusted by
pr or - button, if continuously
press this button for 2
seconds
above,
in every 0.5 seconds, the value on ten place
of Minute will be increased 1. During blinking,
repress the Clock button,
signal will be
constantly displayed and
it denotes
the setting succeeded. After
powered on,
12:00 is defaulted to display
and signal
will be displayed. If there is signal
time value is Clock value, otherwise
is Timer
value.
be displayed that denotes the
current