7
Getting Started
After unpacking your Hovertrax for the first time, follow all the steps below before you start riding.
Charging the Battery
Your Hovertrax comes with a built-‐in
LiFePO4
(lithium ion phosphate) battery pack. Before you use the Hovertrax for the first time, you
must fully charge the battery. Be sure to charge the battery in a clean, dry location away from direct sunlight flames or sparks.
1.
Plug one end of the power cord into the Hovertrax. Plug the other end into a grounded AC outlet. The red charging light on the
charger unit will turn on.
2.
The charger may take up to one (1) hour to complete its charge. The red light on the charger will turn green once it is finished.
IMPORTANT: If you are not regularly using your
Hovertrax, you should fully recharge the battery at least every sixty (60) days. If the
battery power drops too low, you may not be able to recharge it.
Power Level Indicators
Once the battery is fully charged, the indicator light on the top of the Hovertrax will be green when you turn the unit on. This is what
the lights on the Hovertrax mean:
•
Solid Green: indicates that the battery power level is 50 to 100 percent.
•
Solid Blue: indicates that the battery power level is 10 to 50 percent.
•
Solid Red: indicates that the battery power level is below 10 percent and should be charged.
WARNING: The Hovertrax will notify you when the battery charge is dangerously low by slowing down and shaking the wheels when
you are riding it. If these warnings occur, immediately slow down and safely step off. Turn the unit off. Do not attempt to ride again
until the battery is recharged.
Содержание Hovertrax
Страница 2: ... ...
