37
OPERATION
sMove controller
•
Installation and operation manual
6.3
Pause function
Setting pause function mode
When setting the pause function, the controller will first switch off the connected ventilation units.
Pause duration can be selected for one, two, four or eight hours. After the pause, all ventilation
units connected to the controller will restart in the last stored configuration of output level and
mode.
Requirements:
The controller is in heat recovery or continuous
ventilation mode.
►
Press the button
Pause duration
one time
1 hour
two times
2 hours
three times
4 hours
four times
8 hours
Ö
The LEDs Pause/Off and the corresponding LED
left to the slide control are flash alternately:
1 – 4 x
The pause can be overridden at any time by selecting a different output level.
Ö
You have set the selected pause duration.
1 h
2 h
4 h
8 h
If the controller is in pause function, the operating mode in which the ventilation units restart at
the end of the pause can be changed. To do this, activate the display by touching any button.
Then press the button until the LED lights up in the colour of the desired operating mode.
