29
OPERATION
29
MZ-Home | Operating instructions
4.8
Define limit value for humidity and temperature sensor
The limit value determines the relative room humidity, above which the MZ-Home controller
switches all fans connected to the respective Clust-Air module to the dehumidification function.
It is set to 80 % at the factory. The limit value can be set individually for each zone.
The dehumidification function cannot be selected manually, it is triggered by sensor technology.
►
Touch the navigation arrow
until the menu
item
limits
is displayed
►
Touch the navigation arrow
.
The
limits
submenu is called up.
►
Touch the navigation arrow
to go to the zone
selection.
►
Use the navigation arrow
/
to select the zone whose limit value is to be set.
The displayed zone is active.
►
Use the navigation arrow
to select the menu
item
humidity
.
The marker arrow > points to the
humidity
menu item.
►
Touch the navigation arrow
.
The currently set limit value parameter
flashes.
►
Touch the navigation arrow
/
to decrease / increase the limit value.
The limit value is changed.
►
Confirm the selection with the
navigation arrow
.
The flashing stops.
Requirements:
• You are in the settings main menu.
You have set the limit value for the relative room
humidity. If the room humidity exceeds this, the
dehumidification function is activated.
i
s e t t i n g s
> l i m i t s
> l i m i t s
< z o n e 1 >
h u m i d i t y : 8 0 %
l i m i t s
> < z o n e 2 >
h u m i d i t y : 8 0 %
l i m i t s
< z o n e 2 >
> h u m i d i t y : 8 0 %
l i m i t s
< z o n e 2 >
> h u m i d i t y : 7 0 %
