User Manual
XC2600 Handheld Reader
22
There are two ways to turn on the barcode function, as shown in Figure 20:
Select “1D2D” in the interface, click “Connect”, you can review the barcode function.
Under the RFID mode, click the menu to switch to the barcode channel.
Figure 20 barcode function selection
6.4 Other Functions
Enter “
More
” interface, you can set other relevant information.
Restart/Reset
Restart: restart the handheld reader, Reset: return XC2600 settings to their
defaults.
Standby Time
Time interval that device enter standby mode without being operated,
configurable range: 30 ~ 600s; The device automatically enters standby mode
when exceed the set time.
Flash Time Interval
Flash Time Interval is the time interval that data is written to Flash under the
offline mode, configurable time within 60s.
6. Demo Software Functions and Settings
