Invengo XC-RF300, Руководство пользователя

Страница: 32 / 50

32
5.3 Notion of read modes
During asynchronous read (or default read), the reader continuously tries to read
all tags in the RF field. Several options can be applied that modify the reader’s
behavior during asynchronous read:
● “Multiplexer”: If this mode is active, the reader uses the multiplexer instead
of the default RF configuration for reading. The multiplexer makes it possible
to define a sequence of antennas, tag types and RF output powers that will be
automatically used during the reading process. For example, a user can configure
the multiplexer so that reader tries to read ISO15693 tags for 100ms on channel
1 at 1Watt, then ICode UID tags for 50ms on channel 1 at 2Watts, then ISO15693
tags for 100ms on channel 2 at 1Watt, then ICode UID tags for 50ms on channel
2 at 2Watts.
● “Input triggered”: If this mode is active, the reader waits for GPIO Input #1
to become active in order to activate the RF field and start reading. When GPIO
Input #1 gets back to inactive state, RF field is turned off and the reader stops
reading until input is active again.