Invasion GSH-200SG Скачать руководство пользователя страница 3

27. CHANNEDGAIN FOOTSWITCH: lliis is for  the connection of  a 2-way, double footswitch  (not included) with a 1/4" 

Stereo Jack connector. Such a footswitch  will allow you to switch between the Clean and Overdrive Channels, and 
between Gain Stages 1 and 2. 

28. LINE OUT: This is a 1 V RMS (LINE Level) output for  sending the Master signal to a mixer, recorder, power 

amplifier  etc. 

29. PARALLEL OUTPUT (MINI LOAD: TOTAL 4 OHM): These outputs are for  the connection to Left  external speakers 

with minimum impedances of  4 Ohms respectively. 

30. PARALLEL OUTPUT (MINI LOAD: TOTAL 4 OHM): These outputs are for  the connection to Right external speakers 

with minimum impedances of  4 Ohms respectively. 

31. GND LIFT: This detaches the system ground from  the audio circuit in order to eliminate possible hum. 
32. MAINS CONNECTOR: This is for  the connection to the included power cable. The Mains fuse  is contained in the 

compartment incorporated into this connector. 

SPECIFICATIONS 

Output Power 

100+100 Watts RMS @ 8 П: 120+120 Watts RMS @ 4 О 

Frequency Response: 

30 Hz- 10kHz 

S/N Ratio: 

>80dB 

Input Impedance: 

500 Kll 

Maximum Input Level: 

-45dB 

LINE OUT: 

OdB/lV RMS 

EFFECT SEND 
Nominal Output Level: 

-8dB 

Load Impedance: 

> 1K11 

EFFECT RETURN 
Optimal Input Level: 

-8dB 

Impedance: 

100КП 

Headphone Output: 

60mW (< 

v 8SI 

EQUALIZATION 
BASS: 

+/-15dB @ 50 Hz 

MIDDLE: 

+/-15dB @ 600 Hz 

TREBLE: 

+/-15dB @ 3 KHz 

Power Supply: 
Dimensions: 

625 x 480 x 284mm 

Weight: 

16 Kg 

Отзывы: