12
Surfaces
Your scooter will perform well over many surfaces. However, avoid long grass, loose gravel, sand,
mud and ice.
Transferring
Lift up the arm-pad from the side you wish to leave or sit on the scooter. Use an aid for balance if
required. DO NOT use the tiller or armrests to support the full weight during transfers.
Caution:
Do not turn off the control key whilst the unit is in motion.
The scooters are designed to be dismantled into separate sections for transportation and storage.
The heaviest part of the scooter weighs 36kg (80lb).
Your scooter can be dismantled into the following sections;
Dismantling for Transportation & Storage
• Rear chassis cover.
• 2 x 34 A/h batteries (weight approx. 12kg each).
• Rear drive unit assembly.
• Front chassis assembly.
• Seat.
Dismantling
Pull up on the red lever under the seat and at the same time lift and twist the seat off. (see page 6)
Remove the hand-knob and clip that secures the seat adaptor. Lift the seat adaptor out of the
seat post.
Fold down the back of the seat. (see page 7)
