Invacare Zoom 220, Руководство владельца по эксплуатации и техническому обслуживанию

Страница: 21 / 52

SECTION 4—SAFETY INSPECTION
Part No. 1125053
21
Zoom 220
❑
Tighten locknut if the front wheel wobbles noticeably or loosen locknut if the wheel
binds to a stop.
❑
Ensure that the fork stem bearing set is tight.
❑
Ensure that wheel bearings are clean and free of moisture.
❑
Ensure that the bolts and fasteners on the caster assemblies are tight.
❑
Inspect caster assembly for proper tension by spinning the caster. The caster should
come to a gradual stop.
❑
Inspect tires for flat spots and wear.
❑
Clean molded body shrouds.
Inspect/Adjust Weekly
❑
Ensure that tiller adjustment mechanism engages and disengages properly and
securely.
❑
Ensure that the scooter stops completely when throttle is released (i.e., does not
continue to roll as if the throttle is activated).
❑
Inspect tires for flat spots and wear.
Inspect/Adjust Monthly
❑
Check brake for binding or interference with travel.
❑
Inspect front wheel/fork assembly for proper tension by spinning the wheel. The front
wheel should come to a gradual stop.
❑
Tighten locknut if the front wheel wobbles noticeably or loosen locknut if the wheel
binds to a stop.
❑
Ensure that the fork stem bearing set is tight.
❑
If so equipped, inspect seat swivel for release and engagement (seat locks into the
determined swivel positions).
❑
Inspect the seat positioning strap for signs of wear. Replace if worn or damaged.
❑
Ensure that the buckle on the seat positioning strap latches. Replace if necessary.
❑
Verify that the hardware that attaches the seat positioning strap to the seat frame is
secure and undamaged. Replace if necessary.
❑
Ensure that the bolts and fasteners on the caster assemblies are tight.
❑
Inspect caster assembly for proper tension by spinning the caster. The caster should
come to a gradual stop.