8
WHEELER
9
WHEELER
SEAT WIDTH
Wheeler is a wheelchair to grow in. The seat width can be adjusted by 3 cm, by
moving the side supports and hip supports. It is important that the drive wheels
are also moved outwards when you increase the seat width.
Increase seat width
Hip supports
1.
Loosen the knob (B) on the inside of the hip support
attachment and move the hip support outwards
an amount equal to the side guards.
1
.
2
.
3
.
B
C
D
A
1,5 cm
1,5 cm
1,5 cm
1,5 cm
!
Side guards
2.
Loosen the screw (A) under the side guard on both
sides. Move the side guard outwards. Tighten the
screws.
Drive wheels
3.
Loosen the axle housing nut (C) using a spanner.
Ensure that you tighten the axle housing nut
securely when you have moved the drive wheels
outwards an amount equal to the side guards and
the hip supports.
3 mm of the casing (D) must protrude from the
nut.
Check following when you are ready: There
should not be risk of trapping fingers bet-
ween rear wheels and fixed parts on the
seat, for example, armrest. If there is a
risk please adjust the distance, see "seat
width"
B
C
D
A
