Invacare Wheelchair Pronto M61, Руководство пользователя

Страница: 26 / 68

Invacare® Pronto™ M61 Series with SureStep®
5.4 Center-mounted footboard
WARNING!
After any adjustments, repair or service and
before use, make sure that all attaching hardware
is tightened securely - otherwise injury or damage
may result.
– Before performing any maintenance, adjustment or
service verify that on/off switch on the joystick is in
the off position.
–
DO NOT stand on the flip-up footboard. When
getting in or out of the wheelchair, make sure that the
flip-up footboard is in the upward position.
WARNING!
Limited clearance between footboard and caster
–
The user’s feet MUST remain centered on the
footboard, away from the footboard sides, while
operating the wheelchair. If the user’s feet are allowed
to rest off the side of the footboard they may come in
contact with the caster possibly resulting in injury.
5.4.1 Removing/Installing the footboard assembly
WARNING!
Pinch point may occur when adjusting the
footboard
WARNING!
Make sure the detent balls of the quick-release
pin are fully released beyond the outer edge of
the tube before operating the mobility device.
Otherwise, injury and/or damage may result.
– Keep detent balls clean.
Detail “A”
Removing
1. Remove the quick release pin
B
that secures the footboard
assembly
D
to the frame by depressing the button
A
while
sliding the pin out.
2. Remove the footboard assembly from the frame
E
.
26 1590425-A