background image

6

TRACER RECLINER ONLY:

WARNING

ALWAYS make sure that the wheelchair is stable BEFORE using the recliner.

Anti-tippers MUST BE attached at all times.

ALWAYS engage both wheel locks while reclining or inclining (reverse recline) the wheelchair.

Make sure detent pin of the spreader bar is completely extended through the hole in the handle
BEFORE using the wheelchair.

Make sure both back canes are at the same angle BEFORE releasing the handles of the recline
mechanisms.

Mount the rear wheels in the Rear Wheel Offset Bracket ONLY. NEVER reposition the rear wheels to
the forward position, stability of the wheelchair will decrease.

TO HEALTHCARE PROFESSIONALS/ASSISTANTS:

The Tracer SX Recliner wheelchair MUST be operated by a healthcare professional or assistant
when in ANY reclined position.

Make sure the patient is properly positioned in the wheelchair before reclining or inclining (re-
verse recline) to maintain maximum stability and safety.

When returning the occupant of the wheelchair to the full upright position, more body strength will be
required for approximately the last twenty (20) degrees of incline (reverse recline). Make sure to use
proper body mechanics (use your legs) or seek assistance if necessary to avoid injury.

Assistants MUST be prepared to support the weight of the occupant when reclining, or return-
ing the occupant of the wheelchair to the full upright position.

TIRE PRESSURE
DO NOT use your wheelchair unless it has the proper tire pressure (p.s.i.). DO NOT overinflate the
tires. Failure to follow these suggestions may cause the tire to explode and cause bodily harm.
Recommended tire pressure is listed on the side of the tire.

Replacement of a pneumatic tire or tube MUST be performed by a qualified technician.

WEIGHT TRAINING
Invacare DOES NOT recommend the use of its wheelchairs as a weight training apparatus. Invac-
are wheelchairs have NOT been designed or tested as a seat for any kind of weight training. If
occupant uses said wheelchair as a weight training apparatus, Invacare shall NOT be liable for
bodily injury and the warranty is void.

WEIGHT LIMITATION
The Tracer DLX / SX / SX RECLINER / TITAN wheelchairs have a weight limitation of 250 lbs.

OPERATING INFORMATION

WARNING

SAFETY SUMMARY (CONTINUED)

S
A
F
E
T
Y

S

U

M
M

A
R
Y

SAFETY SUMMARY

Содержание Tracer DLX





































Отзывы: