Invacare Top End Force Скачать руководство пользователя страница 11

Страница: 11 / 80

TYPICAL PRODUCT PARAMETERS

Part No 1146024

Recumbent Handcycle Series

TYPICAL PRODUCT PARAMETERS

*NOTE: Knobby tires will reduce side wheel clearance to approximately 1-inch (2.54 cm).

TOP END XLT

TOP END XLT JR

Seat Width:

14 to 20 inches (35.56 to 50.8 cm)

14 inches (35.56 cm)

Seat Depth:

15 inches (38.1 cm)

Seat-to-Floor (approx.): 12, 13, or 14 inches (30.48, 33.02, or

35.56 cm)

12, 13, or 14 inches (30.48, 33.02, or

35.56 cm)

Back Style:

Adjustable Back Angle 90° - 110°

Back Height Fixed/

Adjustable Angle:

11-14 inches (Wide) (27.44 - 35.56 cm)

20 inches (Narrow, Tall) (50.8 cm)

11-14 inches (Wide) (27.44 - 35.56 cm)

16½ inches (Narrow, Tall) (50.8 cm)

Footrest:

Adjustable Fore and Aft

Side - Wheel Clearance: 2 inches - * 2½ inches (5.08 - 6.35 cm)

2 inches - 2½ inches (5.08 - 6.35 cm)

Rear Axle:

Quick-Release or Threaded

Quick-Release

Rear Wheel Camber:

15° - Standard

Wheels/Tires:

26-inch Spoke High Performance

(66.04 cm)

24-inch Cruiser or *Knobby (55.88 cm)

20-inch Cruiser (50.8 cm)

Brakes:

Internal reversing drum brakes and

parking brake

Internal reversing drum brakes and parking

brake

Handles:

Ergonomic, Vertical foam covered or

Delrin®

Ergonomic, Vertical foam covered or

Horizontal foam covered

Crankset:

Alloy Crankset

Hub:

FRONT - Shimano Nexus® 7 Speed Hub

REAR - Precision Black Anodized

w/½-inch Quick Release Stainless Axles

FRONT - Shimano Nexus 7 Speed Hub

REAR - Precision Black Anodized w/½-inch

Quick Release Stainless Axles

Spokes:

14 Gauge Stainless

Shift Levers:

Shimano

Gears:

7 Speed

Seat Cushion:

Foam Insert - Optional

Upholstery:

Nylon

Weight:

35 lbs (15.9 kg)

30-35 lbs (13.6 - 15.9 kg)

Shipping Weight:

65 lbs (29.5 kg)

Weight Limitation:

250 lbs (113.4 kg)

Options:

Mirror, Backpack Hydration System,

Computer, Tow Bar, Horizontal Han-

dles, Safety Lights, Helmet and Flag, Seat

Positioning Strap, Quad Cuffs, Quad

Gloves, Mountain Drive, Bike Rack,

Water Bottle and Cage, Tri-pin Quad

Handles, Threaded Axles, Leg Guard

Attachment, Alignment Gauge, Crutch

Holder, Indoor Training Roller

Cordless Computer, Helmet, Quad Cuffs,

Quad Gloves, Seat Positioning Strap, Safety

Flag, Mirror, Safety Lights, Water Bottle and

Cage, Leg Guard Attachment, Crutch

Holder, Bike Rack, Cushion, Towbar for

handcycle, Backpack Hydration System,

Alignment Gauge, Mountain Drive, Tri-pin

Quad Handles.

Содержание Top End Force

















































































Результаты поиска

Содержание Top End Force

Отзывы:

Бренды по названию

Популярные бренды

Invacare Top End Force, Руководство владельца по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Top End Force

Отзывы:

Бренды по названию

Популярные бренды