In
vacar
e
®
T
arsys
®
2G P
o
w
e
r
Tilt and Recline Seating Systems
10
2G Tilt and Recline Specifications
Dimensions
FWD
RWD
Seat width*
16''-22''
16''-22''
Seat depth
16''-22''
16''-22''
Back height (cane)
20''-26''
20''-26''
Overall width
25.25''
24.75''
Overall length
(from headtube to active anti-tipper)
Short
Long
With vent tray
37''
38.5''
41.5''
Without vent tray
34''
31.5''
34.5''
Overall height (to top of 22'' cane)
41.25''
40.5''
Seat-to-floor height (based on 16'' depth)
At 0°
19.25''
18.5''
At 5°
20.25''
19.5''
Weight capacity – consumer
With vent tray
185 lb. / 285 lb. with HD pkg.
185 lb. / 285 lb. with HD pkg.
Without vent tray
250 lb. / 350 lb. with HD pkg.
250 lb. / 350 lb. with HD pkg.
Product weight
Without base
105 lb.
105 lb.
With base (not including batteries)
300 lb.
260 lb.
Electronics
Standard
Optional
2GT
single toggle
TAC
2GR
TAC
TRCM
2GTR
TRCM
n/a
Actual back material height
Tilt only
Recline/VSR
Back height
Curved ABS
†
Profile
Curved ABS
§
Profile
20''
16.25''
n/a
11.25''
n/a
21''
17.25''
n/a
12.25''
n/a
22''
18.25''
n/a
13.25''
n/a
23''
19.25''
16''
14.25''
n/a
24''
20.25''
18''
15.25''
n/a
25''
21.25''
n/a
16.25''
16''
* 23'' and 24'' available through special order.
†
On the 2GT, there is a 3.75'' gap from the seat pan to the bottom of the back. This allows for the cushion and cannot be reduced.
§
On the 2GR and 2GTR, there is an 8.75'' gap from the seat pan to the bottom of the back cushion. This allows for 5'' of VSR movement
plus 3.75'' to the back-cane pivot point. This can be reduced by ordering a special longer back but will limit the VSR movement.
Overall Length
The following dimensions were measured from the front of the seat pan to the rear of the anti-tippers.
Seat Depths
Short
Base
16" 17" 18" 19" 20"
GB motors with 2GT or 2GTR
29.25"
30.25"
30.25"
31.25"
32.25"
GB
motors
with
2GR
29.25" 30.25" 30.25" 31.25" 31.25"
4-Pole motors with 2GT or 2GTR
29.25"
29.25"
29.25"
30.25"
31.25"
4-Pole motors with 2GR
29.25"
29.25"
29.25"
30.25"
31.25"
Long
Base
18" 19" 20" 21" 22"
GB motors with 2GT or 2GTR
33.25"
34.25"
34.25"
35.25"
36.25"
GB
motors
with
2GR
33.25" 34.25" 34.75" 35.75" 36.75"
4-Pole motors with 2GT or 2GTR
32.25"
33.25"
33.25"
34.25"
35.25"
4-Pole motors with 2GR
32.75"
33.75"
34.75"
35.75"
36.75"
The following dimensions need to be added to the above in order to obtain overall length for the various options on chair.
Option
Add
Extended anti-tippers
4.5"
Extended anti-tippers and ventilator tray*
12"
Center Pivot Style Front Riggings
70NHD- 70˚ swingaway footrests
11.5"
70STAPER- 70˚ tapered footrests
10"
AT5544- Elevating legrests
15"
ELRPW- Powered elevating/articulating legrests
14.5"
Pin Style Front Riggings
PW93- swingaway footrests
14.5"
* Extended anti-tippers come standard with ventilator tray.
