Invacare Scanbeta NG, Руководство пользователя

Страница: 7 / 24

Setup
3 Setup
3.1 Receiving the bed
When you receive the bed, check the packaging. If the bed shows any
signs of damage upon delivery, please read Section Warranty.
WARNING!
Risk of personal damage
There is a risk of entrapment or squeezing, while
assembling or disassembling of the bed.
–
The assembly of the bed and mounting of accessories
must be done by authorized or trained personnel.
– Follow instructions carefully.
IMPORTANT!
–
To avoid condensation the bed should not be used
until it has reached a temperature of 10-40° C.
IMPORTANT!
– After each assembly, check that all fittings are properly
tightened and that all parts have the correct function.
WARNING!
–
The standard electrical equipment must not be
combined with electrical equipment that is not
designed for this bed.
3.2 Main parts of bed
•
The bed can be equipped with different side rails on
right and left sides.
•
The bed must always have both bed ends mounted.
C
D
E
F
G
A
B
B
Bed parts:
A Mattress support E Lowering side rail
B Bed end attachments F Opening side panels
C Fixed side rail G Folding side panels
D
Bed end plates
There are also side panels with:
•
Wooden trims
•
Acrylic glass
3.3 Assemble / Disassemble the bed
CAUTION!
Risk of pinching
– Make sure no fingers are pinched during assembly /
disassembly of the bed.
IMPORTANT!
After assembly
Tighten all screws and check that all parts are properly
aligned with each other and that the bed is stable.
– The bed end attachments must be adjusted for correct
fit when mounting the selected side rails.
3.3.1 Mounting the bed ends
The Allen key to use for assembling the bed ends is attached
on the inside of the base frame (head end).
1570628-B 7